Enfora GSM1308 Specifications download pdf (Page 11)

100

101

AT Command Set Reference

Ver. 1.00

GSM1308AT001 Page 1 Ver. 1.00 – 10/29/2008

1.0 Introduction

1.1. Document Scope

The following documentation pertains to the AT Command Set to be used in

conjunction with the Enfora GSM/GPRS OEM module, the Enabler IIIG.

1.2. Platform Reference and Use

The Enabler IIIG will be referred to using various terms, to include: MS (Mobile

Station), TA (Terminal Adapter), DCE (Data Communication Equipment), or ME

(Mobile Equipment).

The Enabler IIIG can be controlled via the use of a DTE (Data Terminal

Equipment) platform by issuing the AT commands via a serial interface.

1.1. Command Syntax

The attention or “AT” prefix is required prior to entering any command. All

commands require a carriage return or <CR> following the entry of the

desired command. All command responses are encapsulated by a

carriage return and line feed or <CR><LF>. The ASCII display of these

characters is suppressed with only the modem response being presented.

AT message concatenation can be done using the ; <semicolon> between

commands.

The following examples demonstrate the potential usage of AT commands

presented:

Type Example Description

Command Format Query AT+GXXX=? When

entered will

return the

command

format and

value

ranges.

Command Read AT+GXXX? When

entered will

return the

current value

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 442 443

Enfora GSM1308 Specifications Page 11

Comments to this Manuals

Enfora GSM1308 Specifications Page 11

Comments to this Manuals

Related products and manuals for Networking Enfora GSM1308